Additional functions
Skipping programme stages
Stages in the programme in progress can be
skipped or blocks repeated.
Press the End button 7 and the programme
is stopped.
PROGRAMME 2 COTTONS
Main wash
PROGRAMME STOP
Programme stop flashes in the Display.
Use the Cursor button 2 to skip the pro-
gramme by blocks to the end.
Use the Cursor button 1 to move the pro-
gramme back by blocks to the beginning.
At the position required press the Start button
X to continue the programme again.
Programme interruption
To interrupt a programme press the End but-
ton 7 (stop-mode).
Press the Start button X to continue.
Programme cancellation
Should you wish to cancel a programme,
press the End button 7 twice in succession.
If the programme was cancelled while there
was water in the machine, or during a spin,
the following shows in the display (example):
PROGRAMME 2 COTTONS
PROGRAMME END
DOOR IS LOCKED
WATER IS IN THE MACHINE
or:
PROGRAMME 2 COTTONS
PROGRAMME END
DOOR IS LOCKED
DRUM NOT YET STATIONARY
Select the programme SEPARATE DRAIN
or SEPARATE SPIN and start it. On com-
pletion the door can be opened.
t
t
t
19 M.-Nr. 05616270
To Next Page
Loading...
