Guide to the machine
Mains on Y Switch
Mains off Z Switch
Door 5 button
Key switch
Position A - Free access
At this operating level only those pro-
grammes can be started which have
been allocated free access.
See Programming Instructions for alloca-
tion of free access.
Position B - Operation
All programmes can be started at this
operating level. The display field will
show the programme which selector has
been turned to.
Position C - Programming
In this position programming can be car-
ried out, e.g. copying, deleting, printing
out, altering, giving or barring free ac-
cess and creating new programme se-
quences. See Programming Instructions.
Position D - Unlocking
At this operating level barred pro-
grammes can be unlocked. Locked Pro-
grammes (e.g. Disinfection programmes)
can not be cancelled 1 minute after they
have been started. If the key switch is
turned to position D in such a pro-
gramme, the programme running is un-
locked and can be cancelled.
See Programming Instructions.
Keys for the key switch
Key 1 (2 supplied) for operating levels A
and B.
Key 2 for operating levels
A, B, C.
Key 3 for operating levels
A, B, C, D.
PROGRAMME 1 COTTONS
>90° C< Main wash 1
Rinses 3 1200 RPM
à
Display
The Display content shows after the ma-
chine is switched on. It has up to four
lines, each 40 digits long, showing which
programme has been selected.
After the Programme start:
Time line for the current Prog. block
Planned temperature of the current prog. block.
Name of the current prog. block.
Programme number
Prog.name
Actual temperature
Points to a further display line
Name of the following Programme block
Planned temperature of the following prog. block.
1 2 3
PROGRAMME 1 COTTONS
60 °C Pre-wash 25 °C
95 °C Main wash
à
9 M.-Nr. 05616270
To Next Page
Loading...
