2. Select a programme
26
Switching on the washing ma-
chine
Turn the programme selector to a
programme.
Programme selection
There are three possible ways to select
a programme:
1. Select standard programmes with
the programme selector dial
Turn the programme selector to the
required programme.
The selected programme will be shown
in the display. The standard display will
then appear.
2. Selecting additional programmes
by setting the programme selector to
“Further programmes/” and using
the display:
Turn the programme selector to the
Further programmes/position.
The following appears in the display:
Touch the sensor controls until
the programme you want appears in
the display.
Confirm the programme with the
OKsensor control.
Preset programme parameters will be
displayed, depending on the pro-
gramme selected.
To Next Page
Loading...
Need help?
General