Installation
*INSTALLATION*
102
Refitting the transit bars
Risk of damage from incorrect
transport.
The washer-dryer may become dam-
aged if moved without the transit
bars in place.
Keep the transit bars in a safe place.
Fit them again if the washer-dryer is
to be moved (e.g. when moving
house).
Opening the covers
Press against the retainer with a
sharp object (a narrow screwdriver,
for example).
The cover will open.
Fitting the transit bars
To fit the bars, follow the instructions
for removing them in reverse order.
Tip: The bars will slide in more easily if
you lift the drum slightly.
Installing under a worktop
Building under kits* must only be in-
stalled/dismantled by a specialist.
- A special building under kit* is re-
quired. The cover plate included in
the building under kit* replaces the lid
of the washer-dryer. It is necessary to
fit the cover plate for electrical safety
reasons.
- Connections for electricity, water and
drainage should be installed in such a
way that they remain accessible
when the washer-dryer is in its final
position.
The building under kit includes installa-
tion instructions.
* Optional accessories
To Next Page
Loading...
Need help?
General
