Name: Miele WWD 320
Brand: Miele
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Installation

*INSTALLATION*

Levelling the machine

The washing machine must stand

perfectly level on all four feet to ensure

safe and proper operation.

Incorrect installation may increase

electricity and water consumption and

may cause the machine to move about.

Screwing out and adjusting the feet

The four adjustable screw feet are used

for levelling the washing machine. All

four feet are screwed in when the

appliance is delivered.

 Using the spanner supplied, turn

counter nut 2 in a clockwise direction.

Then turn counter nut 2 together with

foot 1 to unscrew.

 Use a spirit level to check that the

washing machine is standing level.

 Hold foot 1 securely with a pipe

wrench. Turn counter nut 2 again

using the spanner supplied until it sits

firmly up against the housing.

 Risk of damage due to

incorrectly aligned washing machine.

There is a danger of the washing

machine moving about if the feet are

not secured.

Turn all four counter nuts for the feet

until they sit firmly up against the

housing. Please also check this for

the feet which did not need

adjustment.

Questions and Answers:

Need help?

Do you have a question about the Miele WWD 320 and is the answer not in the manual?

Miele WWD 320 Specifications

General