To Next PageTo Next Page
Need help?Do you have a question about the Migatronic FOCUS 200 AC/DC PFC and is the answer not in the manual?
General| Type | Inverter |
|---|---|
| Input Voltage | 230 V |
| Mains Voltage | 1x230 V |
| Rated Input Current | 16 A |
| Fuse | 16 A |
| Output Current | 200 A |
| Welding Current Range, TIG DC | 5-200 A |
| Output Current Range (DC) | 5-200 A |
| Duty Cycle at 150 A | 60% |
| Duty Cycle at 100 A | 100% |
| Weight | 17 kg |
| Cooling | Fan-cooled |
| Control | Digital |
| Protection Class | IP23 |
| Standards | EN60974-1, EN60974-10 |
Details on connecting the machine to the mains, gas, and electrode holder for proper installation.
Steps for powering on, selecting programs, and adjusting parameters before welding.
Explains the control knob, display, units, and indicators for voltage, overheating, and mains.
Covers pre-flow, slope-down, post-flow, current type, AC-balance, preheating, pulse, and MMA welding settings.
Details on torch potentiometer adjustment, 7-pole plug, and two/four-times trigger modes.
Explains HF and LIFTIG ignition, power reduction, and anti-freeze functions.
Instructions for resetting the machine to factory settings and accessing the user menu for advanced controls.
Details mains voltage, current, power, efficiency, power factor, and duty cycles for the welding machine.
Covers arc-power, hot-start, pre-flow, post-flow, pulse, AC-balance, ignition, and protection class standards.
