Migatronic FOCUS TIG 200 DC PFC User Manual

FOCUS TIG 200 PFC
Brugsanvisning
Instruction manual
Betriebsanleitung
Manuel d’instruction
Manuale d’istruzione
Bruksanvisning
Käyttöohje
Manual de instrucciones
Gebruikershandleiding
Manual de instruções
Kezelési útmutató
Instrukcja obsługi
Руководство по эксплуатации
Návod k obsluze
Valid from 2015 week 50 50113225 C

Migatronic FOCUS TIG 200 DC PFC Specifications

General

Brand	Migatronic
Model	FOCUS TIG 200 DC PFC
Category	Welding System
Language	English

Summary

EC Declaration of Conformity

Machine Programme and Operation

Machine Programme Overview

Details on the machine's capabilities and available welding hoses.

Initial Operation Guide

Steps for mains connection, generator use, and gas connection for startup.

Technical Data and Specifications

Power Source and Load Details

Specifications for power source, permitted load, and duty cycles at various conditions.

Function Parameters Explained

Overview of adjustable parameters for different welding functions and processes.

Control Unit and User Interface

Control Knob and Parameter Adjustment

Using the control knob for parameters like welding current, pre-flow, and slope-down.

Machine Indicators and Controls

Understanding machine indicators and managing secondary parameters and torch control.

Advanced Welding Settings

Configuration for AC/DC welding, pulse parameters, AC-t-balance, and electrode preheating.

Welding Modes and System Management

Ignition and Trigger Mode Selection

Choice between HF/LIFTIG ignition and two-times/four-times trigger modes for TIG welding.

Operational Aids and Protection

Features like anti-freeze control and power reduction for improved operation and safety.

User Menu and Factory Reset

Accessing advanced settings, panel locking, and resetting the machine to factory defaults.