Migatronic PI 350 User Manual

BRUGSVEJLEDNING
USER GUIDE
BETRIEBSANLEITUNG
GUIDE DE L’UTILISATEUR
BRUKSANVISNING
GUIDA PER L’UTILIZZATORE
GEBRUIKERSHANDLEIDING
KÄYTTÖOHJE
GUÍA DE USUARIO
KEZELÉSI ÚTMUTATÓ
PODRĘCZNIK UŻYTKOWNIKA
РУКОВОДСТВО ПОЛЬЗОВАТЕЛЯ
NÁVOD K OBSLUZE
PI 350/500
50115043 B2 Valid from 2017 week 20

Migatronic PI 350 Specifications

General

Mains frequency	50 / 60 Hz
Welding current range, TIG DC	5-350 A
Welding current range, TIG AC	5-350 A
Protection class	IP23
Welding current range, MMA	350 A
Standards	EN 60974-1, EN 60974-10

Summary

Connection and start-up

Permissible installation

Guidelines for safe and correct installation of the welding machine.

Mains and Gas Connections

Steps to connect the power supply and shielding gas to the welding machine.

Welding Hose and Cable Connections

Instructions for connecting welding hoses and earth cables correctly.

Connecting Accessories

Details on connecting electrode holders, CWF Multi, and remote controls.

Operation and Switching On

Instructions for switching the machine on and preparing for welding.

Troubleshooting Guide

Fault Indicators and Symbols

Explanation of indicators for temperature, voltage, mains errors, and general fault symbols.

Troubleshooting Error Codes

Details on common error codes like E04-02, Fdr, H2O, PA.L, GAS, PG.L and their solutions.

Special functions

Menu and Parameter Navigation

Guide to accessing and adjusting machine parameters through the user menu.

Specific Function Settings

Details for GAS, GS.c, Fdr., Ac.t., OPŁ, PG.L., and PA.L. functions.

Torch Trigger and Remote Control

Configuration for torch trigger modes and remote control options.

Program and File Management

Saving and loading machine settings using SD card functionality.

Dynamic Oxide Control

Option to enable or disable the Dynamic Oxide Control feature.

Gas Flow Calibration

Procedure for calibrating gas flow settings on specific machine models.

Technical data

Machine Specifications Overview

Detailed technical specifications for power source, cooling unit, and functions.

Declaration of Conformity

Official declaration stating compliance with EU directives and European standards.