17
Technical data
1) S This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks.
2) Equipment marked IP23 is designed for indoor and outdoor applications.
POWER SOURCE: PI 350 DC PI 350 AC/DC PI 500 DC PI 500 AC/DC
Mains voltage ±15% (50Hz-60Hz), V
- Autotransformer optional ±15% (50-60Hz), V
3x400
3x230-500
3x400
-
3x400
3x230-500
3x400
3x230-500
Minimum generator size, kVA 24 24 35 36
Fuse, A 25 25 32 32
Mains current, effective, A 18.0 17.3 26.1 27.2
Mains current, max., A 23.1 22.7 33.7 35.1
Power, 100%, kVA 12.5 12.0 18.1 18.8
Power, max, kVA 16.0 15.7 23.3 24.2
Power open circuit, W 40 40 40 40
Efficiency 0.80 0.88 0.91 0.87
Power factor 0.93 0.86 0.93 0.89
Current range, A TIG
Current range, A MMA
5-350
5-350
5-350
5-350
5-500
15-500
5-500
5-500
100% duty cycle at 20°C TIG, A
100% duty cycle at 20°C MMA, A
340
330
340
330
475
475
475
475
max. duty cycle at 20°C TIG, A/%
max. duty cycle at 20°C MMA, A/%
350/95
350/90
350/95
350/90
500/80
500/80
500/80
500/65
100% duty cycle at 40°C TIG, A/V
100% duty cycle at 40°C MMA, A/V
300/22.0
290/31.6
290/21.6
290/31.6
420/26.8
420/36.8
420/26.8
420/36.8
60% duty cycle at 40°C TIG, A/V
60% duty cycle at 40°C MMA, A/V
350/24.0
340/33.6
350/24.0
350/34.0
500/30.0
450/38.0
500/30.0
450/38.0
Max. duty cycle at 40°C TIG, A/%/V
Max. duty cycle at 40°C MMA, A/%/V
350/60/24.0
350/50/34.0
350/60/24.0
350/60/24.0
500/60/30.0
500/40/40.0
500/60/30.0
500/40/40.0
Open circuit voltage, V 95 95 95 95
1
Application class S/CE/CCC S/CE/CCC S/CE/CCC S/CE /CCC
2
Protection class (IEC 529) IP23 IP23 IP23 IP23
Standards EN/IEC60974-1.
EN/IEC60974-2.
EN/IEC60974-3.
EN/IEC60974-10
EN/IEC60974-1.
EN/IEC60974-2.
EN/IEC60974-3.
EN/IEC60974-10
EN/IEC60974-1.
EN/IEC60974-2.
EN/IEC60974-3.
EN/IEC60974-10
EN/IEC60974-1.
EN/IEC60974-2.
EN/IEC60974-3.
EN/IEC60974-10
Dimensions (hxwxl), mm 550x250x640 980x545x1090 980x545x1090 980x545x1090
Weight excl. cooling liquid, kg 31 72 68 77
COOLING UNIT MCU 1100* MCU**
Cooling efficiency, W 1200 1200
Tank capacity, liter 3.5 3.5
Flow, bar - °C - l/min 1.2 - 60 - 1.75 1.2 - 60 - 1.75
Pressure max., bar 3 3
Standard EN/IEC60974-2 EN/IEC60974-2
Dimensions (hxwxl),
mm
270x240x560
-
Weight, incl. fluid 16.5 kg (3.5 l)
-
FUNCTION PROCESS VALUE RANGE
Arc-power, % Electrode 0-100
Hot-start, % Electrode 0-100
Anti-freeze TIG/Electrode Always active
Start AMP, % TIG 1-200
Stop AMP, % TIG 1-90
Slope-up, sec. TIG 0-20
Slope-down, sec. TIG 0-20
Gas pre-flow, sec. TIG 0-10
Gas post-flow, sec. TIG 0-20
Spot welding time, sec. TIG 0-600
Pulse time, sec. TIG/MMA 0.01-10.0
Pause time, sec. TIG/MMA 0.01-10.0
Base AMP, % TIG/MMA 10-90
Second current (Bilevel), % TIG 10-200
AC-balance TIG/MMA AC 20-80 (MMA = 50)
AC-balance, Ampere TIG/MMA AC 30-170 (MMA = 100)
AC-frequency
TIG/MMA AC 20-150
TIG-ignition TIG HF/LIFTIG
Triggerfunction TIG 2/4
EC DECLARATION OF CONFORMITY
MIGATRONIC A/S
Aggersundvej 33
9690 Fjerritslev
Denmark
hereby declare that our machine as stated below
Type: PI 350/500
conforms to directives: 2014/35/EU
2014/30/EU
2011/65/EU
European standards: EN/IEC60974-1
EN/IEC60974-2
EN/IEC60974-3
EN/IEC60974-10 (Class A)
Issued in Fjerritslev 17.05.2017
Niels Jørn Jakobsen
CEO
*) Separate cooling unit for Pi 350 DC
**) Integrated cooling unit in
Pi 350 AC/DC / Pi 500 DC-AC/DC
To Next Page
Loading...
