Mikado VBAR EVO - Items Needed for First Installation; Required Equipment; Package Contents

1. Itemsneededforrstinstallation
On rst installation, you will need:
• VBar EVO with built in VBar Control VLink
Receiver and a VBar Control radio
• Power supply (BEC or receiver battery).
• Helicopter with servos installed, but not yet
connected! Only digital servos allowed!
• Pitch Gauge (swash plate levelling tool)
• For updates and extensions of VBar EVO you
need the VBar Control Manager software which
you can download conveniently from www.vstabi.
info.
Contents
VBar EVO with built-in VBar Control Receiver, USB C wire,
Gyro Pad.