MikroTik CCR1009-7G-1C-1S+ User Manual

Once logged in, we recommend clicking the "Check for updates" button in the QuickSet menu, as updating your RouterOS software to the latest version
ensures the best performance and stability. For wireless models, please make sure you have selected the country where the device will be used, to
conform with local regulations.
RouterOS includes many configuration options in addition to what is described in this document. We suggest starting here to get yourself accustomed to
the possibilities: . In case IP connection is not available, the Winbox tool ( ) can be used to connect to the MAC address https://mt.lv/help https://mt.lv/winbox
of the device from the LAN side (all access is blocked from the Internet port by default).
For recovery purposes, it is possible to boot the device for reinstallation, see a section Reset button.
Reset button
The RouterBOOT reset button has the following functions. Press the button and apply the power, then:
Release the button when the green LED starts flashing, to reset RouterOS configuration to defaults.
Release the button when the LED turns solid green to clear all configuration and defaults.
Release the button after LED is no longer lit (~20 seconds) to cause the device to look for Netinstall servers (required for reinstalling RouterOS
over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.
Accessories
Package includes the following accessories that come with the device:
Two EU/US AC power cords, D03+QT3 H05VV-F 3x0.75 mm 2 1.83 m RoHS.
Fastening set for rackmount case K-10.
Two Rackmount Case Side Brackets.
USB A Female to Micro B cable.
Please visit wiki pages for MikroTik SFP module compatibility table: https://wiki.mikrotik.com/wiki/MikroTik_SFP_module_compatibility_table
Specifications
For more information about this product, specification and pictures please visit our web page: https://mikrotik.com/product/CCR1009-7G-1C-1Splus
Operating system support
The device supports RouterOS software version 6. The specific factory-installed version number is indicated in the RouterOS menu /system resource.
Other operating systems have not been tested.
Safety Notice
Electric shock hazard. This equipment is to be serviced by trained personnel only.
Federal Communication Commission Interference Statement
To avoid pollution of the environment, please separate the device from household waste and dispose of it in a safe manner, such as in
designated waste disposal sites. Familiarize yourself with the procedures for the proper transportation of the equipment to the designated
disposal sites in your area.

MikroTik CCR1009-7G-1C-1S+ Specifications

General

Flash memory	128 MB
Storage media	Flash
Internal memory	2048 MB
Processor cores	9
Built-in processor	Yes
Processor frequency	1200 MHz
Internal memory type	DRAM
Operating system installed	RouterOS
Operating temperature (T-T)	-20 - 60 °C
AC input voltage	100 - 240 V
Power source type	AC
Power consumption (typical)	34 W
Ethernet LAN (RJ-45) ports	8
Installed SFP+ modules quantity	1
Networking standards	-
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Product color	White
Rack capacity	1U

Weight and Dimensions

Depth	175 mm
Width	444 mm
Height	47 mm
Weight	- g