Name: MikroTik LHG LTE18 kit
Brand: MikroTik
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Expansion slots and ports

Product code LHGGM&EG18-EA

CPU 88F3720 800 MHz

CPU architecture ARM 64bit

Size of RAM 256 MB

Storage 16 MB flash

Number of 1G Ethernet ports 1

LTE modem R11mL-EG18-EA

TAC 86981604

LTE category 18 (1.2Gbps Downlink, 150Mbps Uplink)

LTE FDD bands 1 (2100MHz) / 3 (1800MHz) / 7 (2600MHz) / 8 (900 MHz) / 20 (800MHz) / 28

(700MHz) / 38 (2600MHz) / 40 (2300MHz)

3G category R8 (42.2Mbps Downlink, 11.2Mbps Uplink)

3G bands 1 (2100MHz) / 3 (1800MHz) / 5 (850MHz) / 8 (900MHz)

Micro SIM slot 1

Dimensions 391 x 391 x 227 mm

Operating system RouterOS v7, License level 3

Operating temperature -40°C to +70°C

Reset button

The reset button has three functions:

Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS

configuration (total 5 seconds);

Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device

will now look for a CAPsMAN server (total of 10 seconds);

Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the

RouterBOARD look for Netinstall servers (total of 15 seconds);

Regardless of the above option used, the system will load the backup RouterBOOT loader if the button

is pressed before power is applied to the device. Useful for RouterBOOT debugging and recovery.

Questions and Answers:

Need help?

Do you have a question about the MikroTik LHG LTE18 kit and is the answer not in the manual?

MikroTik LHG LTE18 kit Specifications

General