MikroTik RB260GS User Manual

RB260 series
The RB260GS (CSS106-5G-1S) and RB260GSP (CSS106-1G-4P-1S) is a small switch with five Gigabit Ethernet
ports.
Connecting
• Choose your powering solution, please see Powering section for possibilities.
• Connect your Internet cable to port 1, and local network devices to ports 2-5.
• Set your computer IP configuration to automatic (DHCP).
• Connect your direct input power jack if not using POE, to start up the device.
• The Initial connection has to be done via the Ethernet cable, using the MikroTik Winbox utility.
• Use Winbox to connect to the default IP address of 192.168.88.1 from any port, with the username admin
and no password.
• We recommend clicking the “Check for updates” button and updating your system software to the latest
version to ensure the best performance and stability.
• Set up your password to secure the device.
Mounting
This device is designed for use indoors by placing it on the flat surface or mounting on the wall, mounting points are
located on the bottom of the device, screws are not included in the package. Screws with size 4x25 mm fit nicely,
depending on your wall structure you can use dowels 6x30 mm and 6 mm drill bit if needed.
When mounting on the wall, please ensure that cable feed is pointing downwards. We recommend using shielded
Cat5/6 cable for our devices. The IP rating scale for this device is IPX0.
Powering
The device accepts power from the power jack or from the Ethernet port:
• Direct-input power jack (5.5 mm outside and 2 mm inside, female, pin positive plug) accepts DC 11-30 V.⎓
• Ethernet port accepts passive Power over Ethernet DC 11-30 V.⎓
The power consumption under maximum load can reach 5 W. RB260GSP version with attachments 53 W.
Connecting to a POE Adapter:
1. Connect the Ethernet cable from the device to the POE port of the POE adapter.
2. Connect an Ethernet cable from your LAN to the LAN port of the POE adapter, please mind arrows for data
and power flow.
3. Connect the power cord to the adapter, and then plug the power cord into a power outlet.
RB260GSP version Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to
the unit (passive PoE over data lines only).
Configuration
Once logged in, we recommend clicking the “Check for updates” button in the QuickSet menu, as updating your
RouterOS software to the latest version ensures the best performance and stability. For wireless models, please
make sure you have selected the country where the device will be used, to conform with local regulations.
RouterOS includes many configuration options in addition to what is described in this document. We suggest
starting here to get yourself accustomed to the possibilities: https://wiki.mikrotik.com/wiki/SwOS/CSS106 . In case
IP connection is not available, the Winbox tool (http://mt.lv/winbox) can be used to connect to the MAC address of
the device from the LAN side (all access is blocked from the Internet port by default).
For recovery purposes, it is possible to boot the device for reinstallation, see section Buttons and Jumpers.
See mikrotik.com/products for the latest version of this document. Document #50493 Modified on: 03.JUL.2019

MikroTik RB260GS Specifications

General

Switch layer	-
Power connector	DC-in jack
SFP module slots quantity	1
Basic switching RJ-45 Ethernet ports type	Gigabit Ethernet (10/100/1000)
Basic switching RJ-45 Ethernet ports quantity	5
10G support	No
MAC address table	- entries
Product color	White
LED indicators	Yes
Input voltage	6 - 31 V
Power consumption (typical)	6 W
Operating temperature (T-T)	-25 - 65 °C
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	139 mm
Width	113 mm
Height	28 mm
Weight	212 g

Summary

Connecting the RB260 Series

Initial Connection Steps

Steps for initial connection including power, network, and software utility.

Software Update and Security

Recommendation to update system software and set up a password for security.

Device Mounting and Powering

Mounting Guidelines

Instructions for indoor mounting on flat surfaces or walls, including screw recommendations.

Powering Options

Details on power sources: DC jack and Ethernet (PoE), including consumption.

Connecting to POE Adapter

Step-by-step guide for connecting the device using a POE adapter.

System Configuration and Recovery

Initial Configuration Steps

Recommendation to check for updates and select country for wireless models.

Accessing Configuration

Information on using Winbox utility for configuration and MAC address connection.

Recovery and Reinstallation

Guidance on booting the device for reinstallation via sections on buttons and jumpers.

Hardware Features and Specifications

Expansion Slots and Ports

Details on available Ethernet and SFP ports.

Reset Button Functions

Explanation of the reset button's functions for configuration and recovery.

Included Accessories

List of accessories provided with the RB260GS and RB260GSP models.

Technical Specifications

Links to web pages for detailed product specifications.

Operating System Support

Information on SwOS software support and firmware compatibility.

MikroTik Mobile App

Guidance on using the mobile app for router configuration.

Regulatory Compliance

FCC Interference Statement

FCC rules compliance for digital devices and potential interference mitigation.

Industry Canada Compliance

Industry Canada license-exempt RSS standard compliance statement.

CE Declaration of Conformity

Manufacturer Declaration

EU declaration of conformity for RouterBOARD radio equipment compliance with Directive 2014/53/EU.