MikroTik wAP LTE kit User Manual (English)

To Next Page

7/30/2021

wAP kit-series - User manuals - MikroTik Documentation

https://help.mikrotik.com/docs/display/UM/wAP+kit-series

1/7

Pages / User Manuals / LTE products

wAP kit-series

This manual is for wAP kit series models:

wAP LTE kit

wAP LTE kit US

wAP 4G kit

This device needs to be upgraded to RouterOS v6.44.6 or the latest version to ensure compliance with local authority regulations.

Note. The information contained here is subject to change. Please visit the product page on www.mikrotik.com for the most up to date version of this document.

Quickstart

Use a Phillips head screwdriver to loosen the screw, which secures the bottom lid (see Bottom Lid).

Insert the SIM card.

Choose your powering solution, please see the Powering section for possibilities.

Connect the Ethernet cable to the PoE and connect the other end of the Ethernet cable to this MikroTik router. Plug the provided power supply into the PoE injector.

Wireless AP mode is enabled by default, you can connect from your computer to the SSID that begins with "MikroTik". The configuration interface is available via a web

browser. The address is https://192.168.88.1 .

Connect to the wireless network, open https://192.168.88.1 in your web browser to start the configuration.

User name: admin and there is no password by default you will be logged in automatically to the Quick Set screen.

Click the "Check for updates" button on the right side and updating your RouterOS software to the latest version to ensure the best performance and stability. Must have a valid

SIM card inserted.

To personalize your wireless network, SSID can be changed in the fields "Network Name";

Choose your country on the left side of the screen in the field "Country", to apply country regulation settings.

Set up your wireless network password in the field "WiFi Password" the password must be at least eight symbols.

Set up your router password in the bottom field "Password" to the right and repeat it in the field "Confirm Password", it will be used to login next time.

Click on the "Apply Configuration" to save changes.

To manually update the device if no Internet connection is available.

Download the latest RouterOS software from https://mikrotik.com/download.

Choose MIPSBE packages, and save them to your PC.

Connect again and in Files menu upload downloaded packages.

Restart the device.

MikroTik mobile app

Use the MikroTik smartphone app to configure your router in the field, or to apply the most basic initial settings for your MikroTik home access point.

1. Scan QR code and choose your preferred OS.

2. Install and open application.

3. By default, the IP address and user name will be already entered.

4. Click Connect to establish a connection to your device through a wireless network.

5. Choose Quick setup and application will guide you through all basic configuration settings in a couple of easy steps.

6. An advanced menu is available to fully configure all necessary settings.

Safety Warnings

Before you work on any equipment, be aware of the hazards involved with electrical circuitry, and be familiar with standard practices for preventing accidents.

Read the installation instructions before connecting the system to the power source.

It is the customer's responsibility to follow local country regulations, including operation within legal frequency channels, output power, cabling requirements, and Dynamic

Frequency Selection (DFS) requirements. All Mikrotik radio devices must be professionally installed.



Need help?

Do you have a question about the MikroTik wAP LTE kit and is the answer not in the manual?

MikroTik wAP LTE kit Specifications

General

Flash memory	16 MB
Internal memory	64 MB
Built-in processor	Yes
Operating system installed	RouterOS
Internal	No
Product color	White
Security algorithms	Not supported
Operating relative humidity (H-H)	-40 - 60 %
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Receiver sensitivity	1MBit/s 22 -96 11MBit/s 22 -89 6MBit/s 20 -93 54MBit/s\\t18 -74 MCS0 20 -93 MCS7 16 -71
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	- Mbit/s
Antenna features	Integrated antenna
Antenna gain level (max)	2 dBi
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1