EasyManua.ls Logo

Miku SUPER - RIDING GUIDE; Pre-ride Checklist

Miku SUPER
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
05 RIDING GUIDE
08
09
Speed display
The speed display shows the riding speed.
Battery capacity display
This indicator shows the remaining capacity of the battery.
Drive mode
Here shows the speed mode which you choose.
Driving beam indicator
Lights up whenever high beam is switched on.
Left direction indicator
This indicator light flashes when the left turn signal light is
activated.
Mileage display
Switch on the ignition, the indicator first 10 seconds displays the
total distance the scooter has been ridden in kilometers. And
then display the distance of single riding in kilometers.
Right direction indicator
This indicator light flashes when the right turn signal light is
activated.
Pre-ride Checklist
The condition of a vehicle is the owners’ responsibility. The operator should check the vehicle by
simple but thorough inspection, to make sure of vehicle condition, quick inspect some key and
important parts, to prevent the vehicle from serious consequence/accident. Please carefully check
the following points before each ride.
Tires
Ensure that both tires have at least 1/8 inch tread
depth at center.
Both tires must be inflated to the pressure indicated
on the tire sidewalls.
Replace the tires if tread height is less than 1/8 inch
at the center of tires.
Throttle
Check for smooth operation. Make sure throttle grip
could return to cut off power.
Check for frayed cable or damaged cable housing.
Replace damaged cable to avoid electricity shock.
Check for mud, debris and ice in the throttle
mechanism. Clean out any contamination.
1
2
3
1
2
3
DESIGNED BY MIKU TEAM DESIGNED BY MIKU TEAM