MILL AB-H700MINI - Advanced Settings; Daytime Setback Configuration; Nighttime Setback Configuration

EN 10 millheat.com
1) Dayme setback
When you want the heater to reduce the
temperature during the day (set for
weekdays from now on) press . . The
display shows "d".
Enter the correct weekday. (Monday = 1,
Tuesday = 2, Wednesday = 3, Thursday =
4, Friday = 5, Saturday = 6, Sunday = 7).
Save by pressing this: .
Enter the desired temperature for
dayme setback. Save by pressing .
Enter the desired number of hours for
dayme setback. Save by pressing .
*Control light is steady green when
the heater is in an acve setback period.
The control light is steady white when the
setback period is inacve, but has been
programmed.
ADVANCED SETTINGS
2) Nighme setback
When you want the heater to reduce
the temperature in the evening
(applicable every evening/night from
now on) press . The display shows °C.
Enter the desired temperature for
nighme setback. Save by pressing .
Enter the desired number of hours for
nighme setback. Save by pressing .
*Control light is steady green when
the heater is in an acve setback period.
The control light is steady white when
the setback period is inacve, but has
been programmed.