MILL AB-H700MINI - AB-H700 MINI Instructions

AB-H700MINI — Instrucons
Control panel for AB-H700MINI
1. Indicator light
2. OFF/ON
WARNING: Be sure the foot is ed correctly and according to the instrucons before using the heater!
Use
Set the heater to OFF. Plug the heater into a grounded outlet.
1. Set the heater to ON. The indicator light will be lit when the heang elements are heang up.
2. To turn o the heater, set the output selector to OFF. If the heater will be le unused for a longer period of me, pull out
the plug.
3. The heater has an overheat protecon that turns the device o if any parts become extremely hot.
EN 7 www.millovn.no