3.
Press the button Start/Stop .
ð
The indicator LED of the button lights up and the selected song is played.
4.
Press Start/Stop again to stop playback.
Tempo and time signature of the currently playing song are additionally shown in the
top right of the display.
1. Press the button [SETUP].
2.
Use [PAGE] to select the parameter ‘BACK VOLUME’.
ð
The currently set value for song volume is flashing in the display.
3. Use the rotary control [–] / [+] to set the desired volume in a range from 0 to 127 (default
value is 41).
Adjusting song volume
Operating
MPS-500 USB
29
To Next Page
Loading...
