6.7 Reset to factory defaults
1. Press the button [SETUP] to open the Setup menu.
2.
Use [PAGE] to select the menu item ‘Reset’.
3. Use the rotary control [–] / [+] to select one of the five options:
n ‘Reset Kits’ (resets all drum kits, including user kits)
n ‘Reset Settings’ (resets all system settings)
n ‘Reset Xtalk’ (resets crosstalk settings)
n ‘Reset Songs’ (deletes all user songs)
n ‘Reset All’ (restores factory default condition)
4. Confirm your selection with [ENTER].
The reset of the device settings will take some seconds. During this period, no pad
should be played. Then you should switch the unit off and on again.
Operating
e-drum module
48
To Next Page
Loading...
