Navigates the screen, stepping upwards through a list of items;
allows “scrolling” to bring further items into view.
• In “Set up” mode: switches between white and black pieces.
Navigates the screen, stepping down through a list of items; allows
“scrolling” to bring further items into view.
• In “analysis” display: switches between main continuation and
opening name.
• In “Set up” mode: switches between white and black pieces.
Switches the computer on, or places it in “standby” mode.
In “standby” mode, ChessGenius retains the current game and
parameters (e.g. the “level”) in its memory, and after switching on
again you can resume play from the same point.
Except while calculating a move, ChessGenius will switch off
automatically if there has been no press on a square or button in the
last 10 minutes.
If you don't want to use the computer for a lengthy period or if you
want to transport it, you can disconnect the power supply
completely with the ON/OFF switch (at the back of the computer
beneath row 8 of the chessboard). Place the computer in standby
mode beforehand, so that your settings and your last game are
saved.
RESET Located in a recess on the underside of the unit. Activated by
inserting a thin object into the opening. If this is done while the RED
button is held down, the settings are restored to the state in which
you first acquired the computer.
ON/OFF The switch located next to the input for the power adaptor, under
row 8 of the chessboard. Disconnects the computer from its power
source. Use this function if you travel (in this way you avoid
switching on accidentally), or if you are storing the computer for a
lengthy period of time.
To Next Page
