Need help?Do you have a question about the Miller Electric XMT 304 CC/CV and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Output Current Range | 5 - 300 A |
| Rated Output | 300 A at 32 V |
| Duty Cycle | 60% at 300 A |
| Protection Class | IP23 |
| Input Phase | 1 or 3 phase |
| Welding Processes | SMAW, GTAW, GMAW, FCAW |
| Input Voltage | 208/230/460 V |
Details potential hazards associated with arc welding processes and equipment.
Covers key hazard types: fumes, arc rays, fire, sparks, gas, noise, cylinders, and interference.
Guides on choosing location, selecting cables, and connecting remote/110V receptacles.
Details electrical service requirements and steps for connecting 3-phase input power.
Identifies and explains the function of each control and switch on the front panel.
Lists common problems and their corresponding remedies for the welding unit.
To Next Page
