Introduction
Milli-Q® Direct 8/16 System 5
Safety Information
Your Milli-Q® Direct System should be installed and operated according to the
instructions in this manual.
In particular, the hydraulic and electrical specifications should be followed and met.
It is important to use this equipment as specified in this manual; using this equipment
in a different manner may impair the safety precautions of the Milli-Q® Direct System.
This ATTENTION symbol is used to refer to instructions in this manual that need
to be done carefully.
These symbols are used to indicate that proper safety equipment has to be used.
Protective glasses and gloves must be worn.
This UV RADIATION sticker is used to refer to a position on the water system
Cabinet or inside of it where exposure to UV light is possible.
This DANGER sticker is used to refer to a position on the water system Cabinet
or inside of it that could be hazardous.
This ELECTRICAL GROUND sticker is used to refer to a position on the water
system Cabinet or inside where an electrical ground connection is made.
This ELECTRICAL DANGER sticker is used to refer to a position on the water
system Cabinet or inside where an electrical danger could exist.
IMPORTANT!
Your water system should be installed and operated in a clean and dry area. Please refer
to the environment requirements page at the end of this manual.
Your water system is not designed for domestic use.
To Next Page
Loading...
Need help?
General
