Need help?Do you have a question about the Milli-Q IQ 7010 and is the answer not in the manual?
General| Brand | Milli-Q |
|---|---|
| Model | IQ 7010 |
| Category | Water Filtration Systems |
| Language | English |
Details model, catalog number, voltage, and frequency for Milli-Q IQ systems.
Defines the system's purpose and limitations for producing pure and ultrapure water.
Describes the different units that comprise the Milli-Q IQ 7003/7005/7010/7015 system.
Explains the three main sections: production, storage, and distribution of pure and ultrapure water.
Presents the production and distribution flow schematics with numbered components.
How to deactivate the screensaver on the POD touch-screen interface.
Instructions for dispensing ultrapure water using the Q-POD dispenser, including flow rate adjustment.
Instructions for dispensing pure water using the E-POD dispenser, including flow rate adjustment.
Guides users on how to auto-dispense a pre-selected volume of water.
Explains the assisted dispensing mode for precise volume dispensing with manual stop.
Details how to visualize, personalize, and export dispense reports generated by the system.
Explains how to view, understand, and manage system alerts and alarms for maintenance and issues.
Illustrates how to navigate the POD's 5" touch-screen interface for controlling and monitoring the system.
Describes the different applications and pop-up screens available on the POD interface.
How to check the status of consumables using color-coded icons and access their details.
Explains the process of scanning consumable cards for system identification.
Details how to find system model, installation details, and download the user manual.
Explains how to access and export daily quality measures and dispense event reports.
Graphic representation of hydraulic components and their status indicators.
Guide to accessing diagnostic summaries and information for troubleshooting system issues.
Lists key contacts for technical support, application specialists, and system management.
Settings related to screensaver, water sensor, and alarm relay.
Configuration options for periodic EDI rinsing parameters.
Settings for tank capacity and refill setpoints.
Settings for recirculation, safety flow stop, and dispensing mode.
Settings for alarms related to EDI resistivity, permeate conductivity, and RO parameters.
Settings for tank-related alarms like vent filter and tank empty.
Settings for alarms related to product resistivity, TOC, and various polishers.
How to connect the system to a laptop or network via Ethernet or USB.
Configuration of date, time, time zone, and display language.
Management of system manager password and access levels.
Formatting of local units for resistivity, temperature, pressure, etc.
Procedures for logging in as a manager and modifying system settings.
Settings for Lab Close mode, Safety Flow Stop, and Screensaver duration.
Settings for periodic EDI rinsing and its timing.
Customization of POD parameters like name, screen brightness, sound volume, and flowmeter offset.
Details on optional accessories like water sensors, foot pedals, and alarm relays.
How to adjust alarm set points for water quality parameters and cartridge lifetimes.
Details on connecting the system to a laptop or network via Ethernet, including IP and DHCP.
Configuration options for temperature compensation of resistivity and conductivity measurements.
Step-by-step instructions for installing new consumables using wizards.
Procedures for cleaning components like the inlet strainer and TOC monitor.
How to depressurize the system, usually for specific maintenance tasks.
Detailed steps for replacing IPAK Gard and IPAK Quanta consumables.
Visual guide and instructions for removing and installing system packs (consumables).
How to install application-specific POD-Paks for enhanced purification.
Step-by-step guide for removing and replacing the vent filter on the storage tank.
Procedures for cleaning the inlet strainer and the A10 TOC Monitor.
Instructions for performing Cl2 and PH cleaning, often requiring service representative.
Explanation of the depressurization function and its purpose.
Information and safety precautions for the UV lamps, recommending professional service.
Steps to depressurize both production and distribution sections in case of a leak.
Instructions on how to safely turn off the system, including unplugging.
Explains potential causes for inaccurate dispensing and how to use flow meter offset.
Recommendations for addressing high TOC levels, including pack replacement and monitor cleaning.
Identifies potential causes for low flowrate, such as air-locked POD-Paks or clogged POD-Paks.
Steps to diagnose why the storage tank is not refilling, checking status and alarms.
Lists parameters, values, and ranges for Elix water produced by the system.
Specifies the quality parameters and standards for the ultrapure product water.
Outlines the water quality specifications for the Milli-Q IQ Element unit.
Specifies the necessary parameters and ranges for the incoming tap water feed.
Details electrical specifications including catalog numbers, frequency, power, and voltage.
Lists environmental conditions necessary for optimal system operation.
Describes the POD's touch screen, USB, and Ethernet communication capabilities.
Provides dimensional drawings and weights for the water purification units.
Details the dimensions and weights for POD dispensers and storage tanks.
Lists dry, shipping, and operating weights for different system components.
Lists accessories for the Milli-Q IQ system along with their catalog numbers.
Provides a list of consumables and their catalog numbers for ordering.
Outlines the product warranty terms and limitations of liability.
Provides essential safety precautions for operating and maintaining the Milli-Q system.
Explains safety symbols and requirements for wall-mounting the system and tanks.
To Next Page
