Need help?Do you have a question about the Milli-Q Direct 8 and is the answer not in the manual?
General| Resistivity | 18.2 MΩ·cm at 25 °C |
|---|---|
| Total Organic Carbon (TOC) | < 5 ppb |
| Pyrogens (Endotoxins) | < 0.001 EU/mL |
| RNases | < 1 pg/mL |
| DNases | < 5 pg/mL |
| Display | Touchscreen |
| Weight | 20 kg |
| Power Supply | 100-240 V, 50/60 Hz |
| Type of Water Produced | Pure and ultrapure water |
| Flow Rate | Up to 2 L/min |
| Particulates | <1 particle/mL (>0.2 µm) |
| Particles > 0.22 μm | < 1 particulate/mL |
| Particle Size | 0.22 µm |
| Connectivity | USB |
| Output Water Type | Ultrapure |
| Dimensions | 504 mm x 332 mm x 467 mm (19.8 in x 13.1 in x 18.4 in) |
Guide for system installation, operation, and maintenance.
Contains notices, warranty limitations, trademarks, copyright, and recycling information.
Details essential safety statements and symbols for proper equipment use.
Introduces system features, installation needs, and consumable information.
Identifies key parts of the system's cabinet and POD unit.
Explains main display use, keypad functions, and mode transitions.
Outlines water quality, weight, electrical, dimensions, and environmental specifications.
Provides an overview of the installation process and a summary list of steps.
Details alarm messages generated during the system installation process.
Guides for assembling the POD Unit and connecting tubing, cables, and power.
Step-by-step guides for installing the Progard® Cartridge and Q-Pak® Pack.
Covers rinsing cartridges, registering timers, and calibrating flow rate.
Introduces the chapter and presents the software map for navigation.
Describes the purpose and functions of the system's STANDBY mode.
Details how to access and use the system's Manager Menu for configuration.
Explains the READY mode, including water dispensing and quality viewing.
Explains how to dispense water and view system information.
Provides instructions on dispensing water using the POD Plunger and volumetric settings.
Details how to access and interpret water quality, operation, alerts, and alarms.
Guides for checking consumable status and accessing system information.
Introduces maintenance tasks and details the schedule for consumables and cleaning.
Step-by-step guides for replacing the Progard® Cartridge and Q-Pak® Pack.
Covers POD Pak replacement, TOC checks, and flow rate calibration.
Guides for sanitising and cleaning the RO cartridges to maintain performance.
Explains what alarms are, how they are displayed, and how to handle them.
Details procedures for viewing, cancelling, and resolving alarm messages.
Lists and explains various alarm messages and their meanings.
Explains alert messages, their types (minor/major), and how they are displayed.
Details procedures for viewing and cancelling minor alert messages.
Lists and explains various alert messages and their meanings.
Lists catalogue numbers for system models, consumables, and accessories.
To Next Page
