Milli-Q Direct 8 - Alarm Information Overview

Milli-Q® Direct 8/16 System 97
Alarm Information
Definition
An Alarm message is a way of informing you that immediate attention is required for
the System.
Alarm shown –
what to do?
It is not recommended to use the System when an Alarm message is shown.
Contact Millipore SAS if an Alarm message is shown and the problem can not be
resolved.
Types
The following table summarizes the different types of Alarm messages.
Type
Description
Alarm stop
Some Alarms automatically stop the System from
dispensing water.
An example of this is the Alarm message PROGARD
CARTRIDGE OUT.
The text display of this type of Alarm can be
cancelled for one hour by using the Keypad.
Alarm
Some Alarms do not automatically stop the System
from dispensing water.
An example of this is the Alarm message
MILLI-Q T < MIN.
The text display of this type of Alarm can be
cancelled for one hour by using the Keypad.
Main Display
The Alarm message is shown superimposed on the Main Display.
The red LED is lit steadily when an Alarm message is shown.
In this example, the Alarm Message MILLI-Q T > MAX is shown.
Continued on next page