Milli-Q Direct 8 User Manual

Milli-Q® Direct 8/16 System 23
Assembling the POD Unit
Separating POD
Arm and Point
Of Delivery
Separate the POD Arm and the Point Of Delivery by cutting and removing the tape that
holds them together.
Placing the POD
Arm
Place the POD and POD Arm onto the POD Mast as shown below.

Milli-Q Direct 8 Specifications

General

Resistivity	18.2 MΩ·cm at 25 °C
Total Organic Carbon (TOC)	< 5 ppb
Pyrogens (Endotoxins)	< 0.001 EU/mL
RNases	< 1 pg/mL
DNases	< 5 pg/mL
Display	Touchscreen
Weight	20 kg
Power Supply	100-240 V, 50/60 Hz
Type of Water Produced	Pure and ultrapure water
Flow Rate	Up to 2 L/min
Particulates	<1 particle/mL (>0.2 µm)
Particles > 0.22 μm	< 1 particulate/mL
Particle Size	0.22 µm
Connectivity	USB
Output Water Type	Ultrapure
Dimensions	504 mm x 332 mm x 467 mm (19.8 in x 13.1 in x 18.4 in)