Need help?Do you have a question about the Milli-Q IQ 7003 and is the answer not in the manual?
General| Type | Water Purification System |
|---|---|
| Model | IQ 7003 |
| Water Type | Ultrapure water |
| Resistivity | 18.2 MΩ·cm |
| TOC | < 5 ppb |
| Particles | < 1 particle/mL |
| Pyrogens (Endotoxins) | < 0.001 EU/mL |
| RNases | < 1 pg/mL |
| Power Supply | 100-240 V, 50/60 Hz |
| Display | Touchscreen |
| Connectivity | USB, Ethernet |
| Application | Laboratory |
| Purification Technology | Reverse Osmosis, Electrodeionization |
| Water Quality | Ultrapure |
| Conductivity | 0.055 μS/cm |
| Bacteria | <1 CFU/mL |
| Proteases | Not detected |
| Feed Water Connection | 1/2 inch |
| Installation | Bench-top |
Details system model, catalogue number, voltage, and frequency.
Explains the system's purpose for producing pure and ultrapure water and its limitations.
Identifies and illustrates the different units that make up the Milli-Q IQ system.
Describes the three main sections: production, POD, and storage tank.
Graphic representation of production and distribution flow schemes.
How to exit the screensaver on the POD touch-screen by tapping or dispensing.
Instructions for recirculating and dispensing ultrapure water using the Q-POD.
Instructions for recirculating and dispensing pure water using the E-POD.
How to auto-dispense a pre-selected volume using the system.
How to auto-dispense a pre-selected volume with manual stop for precision.
How to visualize, personalize, export, and archive dispense reports.
How to view, understand, and manage system alerts and alarms.
Guide to using the POD touch-screen interface, home screen, and main menus.
Overview of system applications, screen navigation, and pop-up interactions.
How to view the status of installed consumables using color icons and detailed information.
Process for scanning consumable cards for system identification using the e-Sure tag reader.
Accessing system ID, lab information, and downloading the user manual.
Viewing and exporting daily quality measures reports and dispensing events.
Graphic representation of system hydraulics and access to troubleshooting resources.
Finding contact information for technical support, application specialists, and system managers.
Settings for screen saver, water sensor, alarm relay, lab close, safety flow stop, and screensaver.
Settings for periodic EDI rinsing, duration, and period.
Settings for tank capacity, refill setpoint, and ASM lamp cycle.
Settings for recirculation duration, safety flow stop, and dispensing mode.
Configuration of alarms for EDI resistivity, permeate conductivity, and RO parameters.
Procedures for logging in, setting passwords, and modifying manager settings.
POD name, screen brightness, sound volume, and flowmeter offset settings.
Settings for water sensors, foot pedals, washer kits, alarm relays, and network connectivity.
Alarms for water quality, inlet strainer cleaning, and cartridge lifetimes.
Settings for date, time, language, and units, including temperature compensation.
Step-by-step instructions for installing consumables using wizards.
Procedures for cleaning system components like inlet strainer and A10 TOC Monitor.
Temporarily stopping production and water processes for maintenance.
Guide for installing IPAK Gard and IPAK Quanta consumables using the wizard.
Step-by-step instructions for pack removal and installation.
Installing application POD-Paks and performing the required rinsing.
How to remove and replace the storage tank vent filter.
Inlet strainer and A10 TOC Monitor cleaning procedures.
Cleaning procedures and UV lamp replacement safety.
Procedures for depressurizing for leaks and safely turning off the system.
Addressing inaccurate volumetric dispensing and high TOC values.
Addressing low flowrate and tank refilling issues.
Reference guide for system icons and their meaning/function.
Specifications for Elix, Product, and Milli-Q IQ Element water.
Requirements for feed water, including pressure, temperature, conductivity, and TOC.
Electrical characteristics and environmental conditions for system operation.
Details on POD touch screen, USB, Ethernet, RFID, and regulatory compliance.
Dimensions and weights for purification units, PODs, and storage tanks.
Table detailing dry, shipping, and operating weights for system components.
Guidelines for equipment disposal and cartridge recycling.
Information on product warranty and liability found on the company website.
Copyright notice, reproduction restrictions, and list of trademarks.
General safety instructions, including handling high voltage and electrical hazards.
Explanation of safety symbols and requirements for wall-mounted installation.
To Next Page
