Settings
22
Accessories
Water sensor
A water sensor can be connected to the system unit
to stop the system from producing water in case of
water spillage. Up to 3 sensors can be connected in
series to cover a wider surface area.
Foot pedal
The pedal is connected to the base of the Q-POD.
In the Q-POD conguration app, activate the foot
pedal via the slider button.
Dispense using the foot pedal
1. Press once and release to dispense in full ow.
2. Press and hold to start dispensing in drop-by-
drop, keep pressing to increase the ow rate up
until full ow is reached. Release at the chosen ow
rate.
3. Press once to stop the ow dispensing.
Washer Distribution kit
This accessory will allow distributing water from a
storage tank to washing machines.
Note : specic tank vent lter HF used for high
owrate application.
Alarm relay
This accessory will allow to relay all, or a selection
of alarms to a remote device.
Select the alarm(s) that will activate the relay.
Sanitary Sampling valve for storage tank
The unique design of the sanitary sampling valve
allows the user to sample mid-stream and prevents
accumulation of bacteria or particles inside the
sampling probe.
It can also be sanitized eectively and easily in
place.
To Next Page
Loading...
Need help?
General
