Milli-Q IQ 7003 User Manual

Requirements and specications
37
REQUIREMENTS AND SPECIFICATIONS
Waterspecications
Product Water
The system has been designed to produce water according to specications when operating
within feed water requirements.
Parameter Value or range
Resistivity 18.2 MΩ.cm @ 25°C
Conductivity 0.055 μS/cm @ 25°C
Total Organic Carbon (TOC) ≤ 5 ppb
Particles (size > 0.22µm)
No particles with size > 0,22 µm if 0,22µm lter used
Bacteria
< 0,01 CFU/mL (with Millipak® 40 or Biopak® lters when in-
stalled and used in a laminar ow hood)
Pyrogens (endotoxins)
< 0,001 EU/mL (with Biopak® lter when installed and used in
a laminar ow hood)
RNases < 1 pg/mL (with Biopak
®
lter)
DNases < 5 pg/mL (with Biopak
®
lter)
Proteases < 0.15 µg/mL
Flow rate up to 2 L/min
Volumetric Dispensing Accuracy +/- 2% for QPOD ; +/- 5% for EPOD
The Milli-Q IQ 7003/7005/7010/7015 system is intended to produce ultrapure water that
meets or exceeds requirements as described by the organizations below:
Organization Water quality / grade
European Pharmacopeia puried water
U.S. Pharmacopeia Puried Water
Japanese Pharmacopeia Puried Water
Chinese Pharmacopeia Puried Water
ASTM
®
D1193 Type I water grade B
ISO
®
3696 Grade 1 water
Chinese National Standard GB 6682 Grade 1 water
JIS K 0557 A4 water
Clinical and Laboratory Standards
Institute (CLSI
®
)
Clinical Laboratory Reagent Water (CLRW)

Milli-Q IQ 7003 Specifications

General

Brand	Milli-Q
Model	IQ 7003
Category	Water Filtration Systems
Language	English