Need help?Do you have a question about the Milli-Q Millipore and is the answer not in the manual?
General| Type of Water Produced | Ultrapure Water |
|---|---|
| Resistivity | 18.2 MΩ·cm |
| Total Organic Carbon (TOC) | <5 ppb |
| Technology | Reverse Osmosis, Ion Exchange, Ultrafiltration |
| Particle Removal | Yes, through filtration |
| Storage Capacity | Varies by model |
| Display | Touchscreen display for system monitoring and control |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Power Supply | 100-240 V AC, 50-60 Hz |
| Bacteria Removal | Yes, through filtration and UV oxidation (depending on the specific Milli-Q system) |
Details the function and types of Q-Gard® Packs used in the system.
Explains the purpose and operation of the UV 185 nm lamp.
Describes the role of the Quantum® Cartridge in water purification.
Explains the function of the POD Pak as the final purification device.
Lists the required and delivered water quality parameters and specifications.
Details the electrical specifications including voltage, frequency, and fuse.
Specifies the required type, conductivity, pressure, temperature, TOC, and pH of feedwater.
Details environmental parameters like altitude, temperature, and humidity for operation.
Step-by-step instructions for installing a new Q-Gard® Pack.
Step-by-step instructions for installing a new Quantum® Cartridge.
Procedure for rinsing the system after installation to ensure optimal quality.
Instructions for installing and registering a POD Pak.
Procedure to reset the timer for the UV 185 nm Lamp after installation.
Guide to calibrating the system's water flowrate.
Explains how to configure various set points for system parameters.
Details how to access the system's Manager Menu.
Details the various configuration options available within the Setup menu.
Instructions for changing the Manager Menu login credentials.
Procedure for adjusting the system's current date and time.
Instructions on how to access and view water quality readings.
Guide to viewing the system's operational status and parameters.
Explains how to check the status and remaining life of system consumables.
Details how to track service history and upcoming maintenance.
Provides information on how to contact Millipore SAS for support.
Instructions for viewing system version, serial number, and other details.
Explains the process of dispensing purified water from the system.
Details the operation of the POD plunger for water dispensing.
Instructions on how to check the real-time water quality parameters.
Describes how to recirculate water to improve its quality before dispensing.
Guides users on how to dispense a specific volume of water.
To Next Page
