Milli-Q Millipore User Manual

Milli-Q® Reference System 43
Description, Continued
Setup
Diagram 1
Diagram 2
Item
Description
Install Date
Change the installation date.
Buzzer
Change the trigger for the Buzzer.
MQ Recirc Mode
Change the amount of time that the System
automatically recirculates every hour in READY
Mode.
POD Flow Stop
Change the amount of time that the POD Unit
dispenses continuously before it automatically
stops.
Temp Comp
Change the Temperature Compensation Mode.
Flow Calibration
Used for performing a flow calibration.
UV 185 nm Activation
Used to activate or deactivate the UV 185 nm
Lamp.
Network Settings
•
Change Network settings.
•
Contact Millipore SAS for more information.

Milli-Q Millipore Specifications

General

Type of Water Produced	Ultrapure Water
Resistivity	18.2 MΩ·cm
Total Organic Carbon (TOC)	<5 ppb
Technology	Reverse Osmosis, Ion Exchange, Ultrafiltration
Particle Removal	Yes, through filtration
Storage Capacity	Varies by model
Display	Touchscreen display for system monitoring and control
Dimensions	Varies by model
Weight	Varies by model
Power Supply	100-240 V AC, 50-60 Hz
Bacteria Removal	Yes, through filtration and UV oxidation (depending on the specific Milli-Q system)