Milli-Q Millipore - Installing and Registering a POD Pak

30 Milli-Q® Reference System
Installing a POD Pak
Overview
The installation of a POD Pak involves 2 steps. These are:
• placing and flushing the POD Pak onto the POD Unit and
•
registering the installation of a specific POD Pak.
Placing and
flushing
Follow the instructions delivered with the POD Pak.
Registering
Follow the steps below to register the installation of the POD Pak.
Step
Action
Diagram
1
Start in STANDBY Mode.
2
Select Menu.
Press .
3
Select Maintenance.
Press .
4
Scroll down to Install POD Pak.
Select it.
Continued on next page