Milli-Q Millipore User Manual

76 Milli-Q® Reference System
Alarm Information
Definition
An Alarm message is a way of informing you that immediate attention is required for
the System.
Alarm shown –
what to do?
It is not recommended to use the System when an Alarm message is shown.
Contact Millipore SAS if an Alarm message is shown and the problem can not be
resolved.
Types
The following table summarizes the different types of Alarm messages.
Type
Description
Alarm stops the
System.
Some Alarms automatically stop the System from
dispensing water.
An example of this is the Alarm message QUANTUM®
CARTRIDGE OUT.
The text display of this type of Alarm can be
cancelled for one hour by using the Keypad.
Alarm does not stop
the System.
Some Alarms do not automatically stop the
System from dispensing water.
An example of this is the Alarm message
MILLI-Q T < MIN.
The text display of this type of Alarm can be
cancelled for one hour by using the Keypad.
Main Display
The Alarm message is shown superimposed on the Main Display.
The red LED is lit steadily when an Alarm message is shown.
In this example, the Alarm Message MILLI-Q T > MAX is shown.
Continued on next page

Milli-Q Millipore Specifications

General

Type of Water Produced	Ultrapure Water
Resistivity	18.2 MΩ·cm
Total Organic Carbon (TOC)	<5 ppb
Technology	Reverse Osmosis, Ion Exchange, Ultrafiltration
Particle Removal	Yes, through filtration
Storage Capacity	Varies by model
Display	Touchscreen display for system monitoring and control
Dimensions	Varies by model
Weight	Varies by model
Power Supply	100-240 V AC, 50-60 Hz
Bacteria Removal	Yes, through filtration and UV oxidation (depending on the specific Milli-Q system)