Milli-Q Millipore - Dispensing Water; Optimizing Water Quality

Milli-Q® Reference System 49
Dispensing water
Optimise Water
Quality
Product Water can be recirculated within the System before dispensing it. This helps
optimise water quality.
Follow the steps below to do this.
Step
Action
Diagram
1
Start in READY Mode.
NOTE:
The Resistivity and temperature
values may or may not be shown
at this time.
2
•
Select Recirculation.
• Press .
3
Wait until the Product water
quality is optimised.
4
Press .
Continued on next page