Milli-Q Millipore - Using the POD Plunger; Volumetric Water Dispensing

50 Milli-Q® Reference System
Dispensing water, Continued
Using the
POD Plunger
To dispense water, press down on the POD Unit plunger while in READY Mode.
Position
Water flow
L
Low Flow (push slightly)
M
Medium Flow (push slightly)
H
High Flow (push down and hold, release when done)
H
Continuous high flow (push down and release; push down
again to stop).
Volumetric
dispensing
Follow the steps below to volumetrically dispense from the POD Unit.
Step
Action
Diagram
1
Make sure the System is in
READY Mode.
2
Select Volume.
Press .
Continued on next page
L
M
H