Milli-Q Millipore User Manual

52 Milli-Q® Reference System
Viewing water quality
Procedure
Follow the steps below to view the water quality.
Step
Action
Diagram
1
Make sure the System is in
READY Mode.
NOTE:
The Resistivity (Res) and
Temperature (T) are seen in the
main READY Mode screen.
2
To see Tank Level indicator,
select Menu.
Press .
3
Select Water Quality.
Press .
The Tank Level is shown if the
System is configured to have a
level sensor.

Milli-Q Millipore Specifications

General

Type of Water Produced	Ultrapure Water
Resistivity	18.2 MΩ·cm
Total Organic Carbon (TOC)	<5 ppb
Technology	Reverse Osmosis, Ion Exchange, Ultrafiltration
Particle Removal	Yes, through filtration
Storage Capacity	Varies by model
Display	Touchscreen display for system monitoring and control
Dimensions	Varies by model
Weight	Varies by model
Power Supply	100-240 V AC, 50-60 Hz
Bacteria Removal	Yes, through filtration and UV oxidation (depending on the specific Milli-Q system)