Milli-Q Millipore User Manual

78 Milli-Q® Reference System
Alarm Information, Continued
Cancelling an
Alarm message
The display of an Alarm message can be cancelled by:
• fixing the cause of the Alarm or
•
using the Keypad. This cancels the display of the Alarm message for 1 hour.
Alarm – before
cancelling
In this example, the Alarm message is MILLI-Q T > MAX.
Main Display
LEDs
Main Display
Cancelling an
Alarm message
procedure
Follow the steps below to cancel an Alarm message.
Step
Action
Diagram
1
The Alarm message is shown
superimposed on the Main
Display.
2
Press .
3
Press .
The display of the Alarm is
cancelled for one hour.
It appears after one hour unless
the cause of the Alarm is fixed.
Continued on next page
ê

Milli-Q Millipore Specifications

General

Type of Water Produced	Ultrapure Water
Resistivity	18.2 MΩ·cm
Total Organic Carbon (TOC)	<5 ppb
Technology	Reverse Osmosis, Ion Exchange, Ultrafiltration
Particle Removal	Yes, through filtration
Storage Capacity	Varies by model
Display	Touchscreen display for system monitoring and control
Dimensions	Varies by model
Weight	Varies by model
Power Supply	100-240 V AC, 50-60 Hz
Bacteria Removal	Yes, through filtration and UV oxidation (depending on the specific Milli-Q system)