Milli-Q Millipore - System Cabinet Indicators; READY Mode Display Values; System LED Indicators

Milli-Q® Reference System 13
Cabinet, Continued
READY Mode –
water quality
values
The READY Mode screen display is explained below.
Diagram
Explanation
In this example, the water dispensed from the POD
Unit has:
• a resistivity of 18.2 MΩ.cm,
• is temperature compensated (TC) at 25°C,
• a temperature of 24.9°C, and
• the TOC value is:
− not indicated with a Milli-Q® Reference System,
and
− indicated with a Milli-Q® Reference A+ System.
NOTE:
This Milli-Q® Reference System does not have a
built-in TOC indicator and therefore does not
display a TOC value. Should you wish to have a
display of the TOC value, please contact Millipore
SAS and inquire about availability of the TOC
Indicator Upgrade Kit.
In this example, there are no water quality
measurements to display. The water quality is only
displayed when it is actually measured during water
delivery or recirculation.
LEDs
The LEDs are described below.
Item
Description
Green LED
System is operating within specifications.
Yellow LED
An Alert is present.
Red LED
An Alarm is present.
NOTE:
If an Alarm and an Alert are present at the same time, then only the red LED is lit.
The red and yellow LEDs are never lit at the same time.
Continued on next page