Milli-Q Direct 8 User Manual

Introduction
Milli-Q® Direct 8/16 System 3
About this User Manual
Purpose
This User Manual is intended for use with a Milli-Q
®
Direct Water Purification System.
This User Manual is a guide for use during the installation, normal operation and
maintenance of a Milli-Q® Direct Water Purification System. It is highly recommended
to completely read this manual and to fully comprehend its contents before attempting
installation, normal operation or maintenance of the Water Purification System.
If this User Manual is not the correct one for your Water Purification System, then
please contact Millipore SAS.
Terminology
The term “Milli-Q® Direct Water Purification System” is replaced by the terms “Milli-Q®
system” or “System” for the remainder of this User Manual unless otherwise noted.
Document
FTPF11486 – V3.0, 03/2013
About Millipore SAS
Internet Site
Address
The Internet site can be used to find addresses, telephone/fax numbers and other
information.
Internet Site Address:
www.millipore.com
www.millipore.com/techservice
www.millipore.com/lab_water
Manufacturing
Site
Millipore SAS
67120 Molsheim
FRANCE

Milli-Q Direct 8 Specifications

General

Resistivity	18.2 MΩ·cm at 25 °C
Total Organic Carbon (TOC)	< 5 ppb
Pyrogens (Endotoxins)	< 0.001 EU/mL
RNases	< 1 pg/mL
DNases	< 5 pg/mL
Display	Touchscreen
Weight	20 kg
Power Supply	100-240 V, 50/60 Hz
Type of Water Produced	Pure and ultrapure water
Flow Rate	Up to 2 L/min
Particulates	<1 particle/mL (>0.2 µm)
Particles > 0.22 μm	< 1 particulate/mL
Particle Size	0.22 µm
Connectivity	USB
Output Water Type	Ultrapure
Dimensions	504 mm x 332 mm x 467 mm (19.8 in x 13.1 in x 18.4 in)