Milli-Q ZR0Q00800 User Manual

Milli-Q® Direct 8/16 System 77
Replacing the Progard® Cartridge and Vent Filter, Continued
Placing
Follow the steps below to install a new Progard® Cartridge.
Step
Action
Diagram
1
Remove the covers on the 2
ports of the Progard® Cartridge.
Wet the O-rings with water.
2
Install the Progard® Cartridge
until it is fully seated.
Close the right door.
3
When a new Progard® Cartridge
is installed, the LCD looks like
this.
4
Press .
5
When the Progard® Cartridge
flush has finished, the Water
System goes to READY Mode.

Milli-Q ZR0Q00800 Specifications

General

Brand	Milli-Q
Model	ZR0Q00800
Category	Water Filtration Systems
Language	English