Pellerin Milnor Corporation 9
BNWVUS08 / 2020122
BNWVUS08 0000279016 A.2 3/16/20 3:40 PM Released
Safety — Divided Cylinder and Staph Guard
®
Washer-
Extractors
BNWVUS08.C01 0000279015 A.3 A.2 3/16/20 3:40 PM Released
Safety Alert Messages—Internal Electrical and Mechanical
Hazards
BNWVUS01.C03 0000235064 A.3 A.2 1/2/20 2:19 PM Released
The following are instructions about hazards inside the machine and in electrical enclosures.
WARNING: Electrocution and Electrical Burn Hazards — Contact with electric
power can kill or seriously injure you. Electric power is present inside the
cabinetry unless the main machine power disconnect is off.
� Do not unlock or open electric box doors.
� Do not remove guards, covers, or panels.
� Do not reach into the machine housing or frame.
� Keep yourself and others off of machine.
� Know the location of the main machine disconnect and use it in an emergency to re-
move all electric power from the machine.
WARNING: Entangle and Crush Hazards — Contact with moving components nor-
mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.
� Do not remove guards, covers, or panels.
� Do not reach into the machine housing or frame.
� Keep yourself and others off of machine.
� Know the location of all emergency stop switches, pull cords, and/or kick plates and
use them in an emergency to stop machine motion.
Safety Alert Messages—External Mechanical Hazards
BNWVUS02.C03 0000235097 A.3 A.2 1/2/20 2:19 PM Released
The following are instructions about hazards around the front, sides, rear or top of the machine.
WARNING: Crush Hazards — Suspended machines only—Spaces between the shell
and housing can close and crush or pinch your limbs. The shell moves
within the housing during operation.
� Do not reach into the machine housing or frame.
� Keep yourself and others clear of movement areas and paths.
Safety Alert Messages—Cylinder and Processing Hazards
BNWVUS03.C03 0000235094 A.3 A.2 1/2/20 2:19 PM Released
The following are instructions about hazards related to the cylinder and laundering process.
General Service Information