Milnor MWF C Series Installation And Service

Disk Brake Maintenance
PELLERIN MILNOR CORPORATION
7. Put the caliper halves in their positions on the brake assembly. Tighten the mounting bolts to
30 foot-pounds (41 Newton-meters).
8. Bleed the brake. See Section 4 “How to Change Hydraulic Fluid and Remove (Bleed) Air
from the Brake Circuit ”.
9. Supply electrical power to the machine.
81

Milnor MWF C Series Specifications

General

Brand	Milnor
Model	MWF C Series
Category	Washer
Language	English