Milnor MWT16E5 - Installation And Service Manual

121 pages

To Next Page

To Next Page

Loading...

Published Manual Number/ECN: MPIMWTXXAE/2019082A

• Publishing System: TPAS2

• Access date: 02/18/2019

• Document ECNs: Latest

Installation and Service

MCT12E5, 16E5, 18E4

MWT12E5, 12X5, 12J5

MWT16E5, 16X5, 16J5

MWT18E4, 18X4, 18J6

PELLERIN MILNOR CORPORATION POST OFFICE BOX 400, KENNER, LOUISIANA 70063-0400, U.S.A.

Table of Contents

Contents3
Important Safety Instructions5
Safety—Rigid Washer Extractors6
Limited Standard Warranty11
How to Get the Necessary Repair Components12
Trademarks13
Safety Placard Use and Placement - MCR12E5, MCR16E5, MCR18E4, MCR27E5, MCR36E4, MCT12E5, MCT16E5, MCT18E4, MCT27E514
Safety Placard Use and Placement MWR12E5, MWR16E5, MWR18E4, MWR18X4, MWR18J4, MWR27E5, MWR36J4, MWT12E5, MWT16E5, MWT18E4, MWT18X4, MWT18J4, MWT27E516
Guards and Covers18
About the Forces Transmitted by Milnor® Washer-extractors20
Installation Tag Guidelines - MCR & MCT Series Machines22
Installation Tag Guidelines - MWR & MWT Series Machines24
Prevent Damage from Chemical Supplies and Chemical Systems27
Handling and Setting Procedures for Rigid Mount Washer-Extractors32
Service Connections35
1. Service and Maintenance39
- Preventive Maintenance40
- Motor Maintenance45
- Torque Requirements for Fasteners49
2. Drive Assemblies57
- Drive Chart58
- Motor Mount61
3. Bearing Assemblies63
- Bearing Assembly MCR/MCT12E5,16E5,18E4 ; MWR/MWT12E/X/J5,16E/X/J5,18E/X/J464
- Bearing Assembly MWR18X6,J6; MWT18X8,J666
4. Shell and Door Assemblies69
- Servicing the Door to Open it with Power Off or with a Malfunctioning Door Lock70
- Door Assembly and Installation MCT12E5,16E5,18E4; MWT1212E/X/J, MWT16E/X/J5, MWT18E/X4, MWT18J675
- Door Lock Mechanism78
- Door Handle and Lock Actuator81
5. Control and Sensing85
- Coin Acceptor & Vault86
- Level Switch88
- Vibration Safety Switch Adjustments90
- Vibration Safety Switch92
6. Chemical Supply93
- Soap Chute for Coin94
- Soap Chute for E-P One-Touch®97
- Soap Chute for E-P Express® and E-P Plus ® Controllers99
7. Water and Drain101
- Water Inlets MCR/MCT12E5, MCR/MCT16E5, MCR/MCT18E4102
- Water Inlets MWR/MWT12E/X/J5, MWR/MWT16E/X/J5, MWR/MWT18E/X4, MWR/MWT18J6104
- Drain Installation106
8. Dimensional Drawings109
- Dimensional Drawing - MCT12E5, MWT12X5111
- Dimensional Drawing - MCT16E5, MWT16X5112
- Dimensional Drawing - MCT18E4, MWT18E4113
- Dimensional Drawing - Pedestal for (1) MWT12E5/X5/J5114
- Dimensional Drawing - Pedestal for (2) MWT12E5/X5/J5115
- Dimensional Drawing - Pedestal for (4) MWT12E5/X5/J5116
- Dimensional Drawing - Pedestal for (1) MCR16E5, MWT16E5/X5/J5117
- Dimensional Drawing - Pedestal for (1) MCR/MWR/MWT18E4,X4,J4,J6119
- Dimensional Drawing - Pedestal for (2) MCR/MWR/MWT18E4,X4,J4,J6120
- Dimensional Drawing - Pedestal for (4) MCR/MWT/MWT18E4,X4,J4,J6121

Other manuals for Milnor MWT16E5

Operator's Guide9 pages

Related product manuals

Preview: Milnor E-P Express

Milnor E-P Express

Preview: Milnor E-P OneTouch

Milnor E-P OneTouch