Pellerin Milnor Corporation
B2T2001013: Hot water connection.
B2T2001014: Cold water connection.
B2T2001016: Flushing water connection. This is the water that
goes into the supply compartment or pumped chemical manifold
to flush chemicals into the machine.
B2T2004027: Steam connection. (Optional) (Not used on
MWT18_ models.)
B2T2006001: Remove restraints inside. Your machine requires ei-
ther one or two anchor bolts on each corner of the base, as shown.
(NOT USED ON MWR36J4.)
B2T2006002: Remove this restraint from the vibration switch.
Installation Tag Guidelines
21
To Next Page
Loading...
