To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee 2734-20 and is the answer not in the manual?
General| Type | Circular Saw |
|---|---|
| Blade Diameter | 7-1/4 in |
| Motor | Brushless |
| Cutting Capacity at 45 Degrees | 1-7/8 in |
| Power Source | Cordless |
| Arbor Size | 5/8 in |
| Voltage | 18V |
| Battery System | M18 |
| Blade Position | Left |
| No Load Speed | 5, 800 RPM |
| Max RPM | 5800 RPM |
| Battery Compatibility | M18 |
| Length | 14.5 in |
| Max Cutting Depth at 45° | 1-7/8 in |
Safety guidelines for the operating environment, including cleanliness, lighting, and avoiding explosive atmospheres.
Precautions related to electrical safety, including plug matching, grounding, and avoiding wet conditions.
Guidelines for personal safety, such as staying alert, using protective equipment, and preventing unintentional starts.
Warnings about keeping hands away from the blade and the "No Hands Zone" to prevent serious injury.
Detailed steps for setting and locking the miter angle using detents or fine adjustments.
Instructions for setting and locking the bevel angle using detents or the bevel angle scale.
Instructions on how to start and stop the tool, use the cut-line indicator, and safety warnings.
