To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee 2740-20 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Fastener Type | Brad Nails |
| Length | 12.5 inches |
| Sequential Firing Mode | Yes |
| Tool-Free Jam Release | Yes |
| Power Source | Battery |
| Battery Type | M18 REDLITHIUM |
| Type | Cordless |
| Magazine Capacity | 110 |
| Firing Mode | Sequential |
| Depth Adjustment | Tool-free |
| Nail Size | 18 Gauge |
Keep work area clean and well lit to avoid accidents.
Follow precautions for power tool electrical safety to prevent shock.
Stay alert, use PPE, and prevent unintentional starting for personal safety.
Proper use and care of battery packs to prevent fire and injury.
Specific safety precautions for operating nailers to prevent injury.
Specifications for the 18 Ga Brad Nailer model.
Specifications for the 16 Ga Straight Finish Nailer model.
Specifications for the 16 Ga Angled Finish Nailer model.
Specifications for the 15 Ga Finish Nailer model.
Instructions for safely removing and inserting the battery pack.
Procedures for loading and unloading fasteners for specific models.
Procedures for loading and unloading fasteners for the 2740-20 model.
How to operate the tool using single sequential actuation mode.
How to operate the tool using contact (bump) actuation mode.
Guidelines for keeping the tool in good working order.
