To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee M18 FUEL 2745-20 and is the answer not in the manual?
Identifies the specific model numbers and product line for the framing nailers.
Emphasizes the necessity of reading and understanding the operator's manual to prevent injury.
Covers maintaining a clean workspace and safe electrical practices to avoid shock and hazards.
Details personal protective equipment, staying alert, and correct tool handling to prevent accidents.
Guidelines for safe use, charging, and storage of battery packs to prevent fire or injury.
Warns against exposing tools or batteries to excessive heat or fire, and outlines charging temperature ranges.
Specifies requirements for tool servicing, using authorized parts, and battery pack service.
Crucial safety rules for nailer operation, including fastener handling, pointing, and controls.
Lists key technical details such as model numbers, collation angles, fastener sizes, and capacities.
Explains the meaning of various symbols and icons used throughout the manual.
Diagram and list identifying all main parts and features of the power tool.
Step-by-step instructions for safely inserting and removing the battery pack from the tool.
Instructions for attaching the protective No-Mar pad to the tool's workpiece contact bracket.
Procedures for loading and unloading fastener strips into the tool's magazine.
Guide on turning the tool on/off and switching between sequential and bump actuation modes.
Detailed steps for operating the tool using both single sequential and contact (bump) actuation.
Instructions on how to adjust the fastener driving depth for different materials.
Procedure for safely removing jammed fasteners from the tool's mechanism.
Steps to reset the tool's striker after a jam or low battery condition.
Essential daily checks to ensure the tool is functioning safely and correctly.
Advice on keeping the tool clean, dry, and in good working order.
Information on recommended accessories and where to direct repair inquiries.
Contact details for obtaining warranty and non-warranty service in the US and Canada.
Details the warranty terms and conditions for products sold in various regions.
Presents general safety rules for power tools in the French language.
General| Battery System | M18 |
|---|---|
| Magazine Capacity | 56 |
| Weight (Tool Only) | 9.5 lbs |
| Fastener Type | Nails |
| Length | 12.5 in |
| Firing Mode | Single Sequential Actuation |
| Warranty | 3 Years |
