To Next PageTo Next Page
Need help?Do you have a question about the Milwaukee M18 FFN and is the answer not in the manual?
Describes the tool's single trigger pull operation mode.
Describes the tool's operation by pressing the tool against the workpiece.
Explains the function and meaning of the low battery indicator light.
Details production code, collation angle, fastener type, diameter, length, and magazine capacity.
Specifies measured sound pressure/power levels and vibration emission values according to standards.
Covers reading instructions, wearing PPE, and general safety precautions.
Warnings about handling, pointing the tool, workpiece contact, and jamming.
Instructions on one-hand use, hand/body placement, workpiece contact, and recoil.
Guidance on battery disposal, storage, and handling to prevent short circuits.
Defines the nailer's intended use and restrictions, including operation modes.
Advice on charging, storage temperature, and contact cleaning for optimal battery life.
Guidance on adjusting the fastener driving depth and testing for proper application.
Step-by-step instructions to remove a jammed fastener, including safety.
Explains the necessity of testing the tool daily or after drops/impacts for safety.
Explains safety, operational, and conformity symbols used throughout the manual.
Describes the tool's single trigger pull operation mode.
Describes the tool's operation by pressing the tool against the workpiece.
Explains the function and meaning of the low battery indicator light.
Details production code, collation angle, fastener type, diameter, length, and magazine capacity.
Specifies measured sound pressure/power levels and vibration emission values according to standards.
Covers reading instructions, wearing PPE, and general safety precautions.
Warnings about handling, pointing the tool, workpiece contact, and jamming.
Instructions on one-hand use, hand/body placement, workpiece contact, and recoil.
Guidance on battery disposal, storage, and handling to prevent short circuits.
Defines the nailer's intended use and restrictions, including operation modes.
Advice on charging, storage temperature, and contact cleaning for optimal battery life.
Guidance on adjusting the fastener driving depth and testing for proper application.
Step-by-step instructions to remove a jammed fastener, including safety.
Explains the necessity of testing the tool daily or after drops/impacts for safety.
Explains safety, operational, and conformity symbols used throughout the manual.
General| Voltage | 18V |
|---|---|
| Nail Type | Framing Nails |
| Power Source | Battery |
| Nail Length | 90 mm |
| Firing Modes | Sequential, Contact |
| Fastener Type | Nails |
| Battery | M18 REDLITHIUM™ |
| Charger | M18/M12 Charger |
| Tool Width | 125 mm |
