Need help?Do you have a question about the Milwaukee M18 FN16GA and is the answer not in the manual?
Safety guidelines for maintaining a clean and safe work environment.
Precautions to prevent electric shock from power tools.
Measures to protect the operator's well-being during tool use.
Guidelines for the proper use and maintenance of battery-powered tools.
Steps to install and remove the battery pack from the tool.
Procedures for loading and unloading fastener strips into the magazine.
How to turn the tool on/off and select the firing mode.
Detailed steps for using the sequential firing mode.
Detailed steps for using the contact or bump firing mode.
Understanding the indicator that signals a low number of fasteners remaining.
How the tool operates and indicates when in temperature protection mode.
Routine maintenance practices to keep the tool in good condition.
Safety guidelines for maintaining a clean and safe work environment.
Precautions to prevent electric shock from power tools.
Measures to protect the operator's well-being during tool use.
Guidelines for the proper use and maintenance of battery-powered tools.
Steps to install and remove the battery pack from the tool.
Procedures for loading and unloading fastener strips into the magazine.
How to turn the tool on/off and select the firing mode.
Detailed steps for using the sequential firing mode.
Detailed steps for using the contact or bump firing mode.
Understanding the indicator that signals a low number of fasteners remaining.
How the tool operates and indicates when in temperature protection mode.
Routine maintenance practices to keep the tool in good condition.
General| Battery Voltage | 18V |
|---|---|
| Power Source | Battery |
| Nail Size | 16 Gauge |
| Magazine Capacity | 110 |
| Depth Adjustment | Yes |
| Firing Mode | Sequential or Contact Actuation |
| Operating Pressure | N/A (Cordless) |
| Battery Compatibility | M18 |
| Sequential/Rapid Fire Mode | Yes |
| No-Mar Tip | Yes |
| Dry Fire Lockout | Yes |
| Tool-Free Jam Release | Yes |
| Type | Cordless |
| Fastener Type | Finish Nails |
| Tool Width | 3.5" |
To Next Page