Need help?Do you have a question about the Milwaukee M18 FFN-502C and is the answer not in the manual?
Mode for controlled single nail firing by pressing trigger after workpiece contact.
Mode for rapid firing by pressing the workpiece contact first, then the trigger.
Explains the warning light indicating a low battery charge.
Detailed step-by-step guide for operating in single sequential mode.
Detailed step-by-step guide for operating in contact actuation mode.
Procedure to safely retract a dropped striker.
Instructions for safely removing and inserting the battery pack.
Procedure for attaching the protective cap to safeguard surfaces.
Detailed technical specifications of the cordless nailer.
Measured noise and vibration levels according to standards.
Crucial safety advice for operating the tool safely.
Specific safety precautions for using cordless nailers.
Further important safety guidelines for tool operation.
Intended use and operational limitations of the nailer.
Guidelines for battery care, charging, and storage.
Explanation of the indicator for low fastener count in the magazine.
Procedure for adjusting the fastener depth for different materials.
Describes tool behavior and recovery during thermal overload.
Steps to safely remove jammed fasteners from the tool.
Basic maintenance tasks for the tool and ventilation slots.
Explains important symbols used for safety and operation.
Displays and explains various warning labels found on the tool.
Mode for controlled single nail firing by pressing trigger after workpiece contact.
Mode for rapid firing by pressing the workpiece contact first, then the trigger.
Explains the warning light indicating a low battery charge.
Detailed step-by-step guide for operating in single sequential mode.
Detailed step-by-step guide for operating in contact actuation mode.
Procedure to safely retract a dropped striker.
Instructions for safely removing and inserting the battery pack.
Procedure for attaching the protective cap to safeguard surfaces.
Detailed technical specifications of the cordless nailer.
Measured noise and vibration levels according to standards.
Crucial safety advice for operating the tool safely.
Specific safety precautions for using cordless nailers.
Further important safety guidelines for tool operation.
Intended use and operational limitations of the nailer.
Guidelines for battery care, charging, and storage.
Explanation of the indicator for low fastener count in the magazine.
Procedure for adjusting the fastener depth for different materials.
Describes tool behavior and recovery during thermal overload.
Steps to safely remove jammed fasteners from the tool.
Basic maintenance tasks for the tool and ventilation slots.
Explains important symbols used for safety and operation.
Displays and explains various warning labels found on the tool.
General| Type | Framing Nailer |
|---|---|
| Battery Voltage | 18V |
| Battery Capacity | 5.0 Ah |
| Depth Adjustment | Yes |
| LED Light | Yes |
| Operating Pressure | N/A (Cordless) |
| Firing Mode | Sequential or Bump Fire |
| Battery Compatibility | M18 |
| Power Source | Cordless |
To Next Page